This planning guide is to be used as a reference in deciding they type and configuration of dumbwaiter to be installed. This guide will show the steps taken to achieve a correct dumbwaiter installation. This guide may be used by home owners, contractors, dealers and architects. The information in this guide is intended as an overview, each installation will have individual and job specific specifications that must be followed. Consult a licensed contractor prior to attempting the construction of the dumbwaiter hoist-way.
Dumbwaiter installation is to be done with the installation instructions provided with your system, and must also be in compliance with the requirements of the national electrical code, American Society of Mechanical Engineers safety code, and state and local building codes. Elevation Innovation products are designed to meet the requirements of the USA ASME A17.1 and Canadian CSA- B44 national elevator codes for dumbwaiters. Dumbwaiters manufactured by Elevation Innovation and installed under the proper parameters have a residential warranty of 5 years, and 3 years for commercial (longest in the industry). Manufacturer assumes no liability for equipment not installed in compliance with these codes.
Elevation Innovation Inc reserves the right to modify the design, technical specifications and products shown in this document.
Planning Steps
1
Contact Elevation Innovation for a local dealer if required by code:
More Info
- Select weight capacity, car type and design specifications
- Research national, state and local code requirements
- Determine the hoist-way size required and available
- Car size, layout and available options
- Machine location (below standard or above for flood zone or 4 stops+
- Electrical requirements (most systems require 120 volt 1 PH 15 amp)
Many locations allow the residential controller in the hoist-way, requires standard plug 12” above floor or below the ceiling for overhead motor. Controller can be mounted on the inside of the machine room door. This makes wiring and trouble shooting easy as the door swings into the easy to access room.
2
Obtain and follow site specific field drawings while building hoist-way, door openings and any other construction related to the dumbwaiter.
3
Coordinate with a licensed contractor for the construction of the dumbwaiter hoist-way and a licensed elevator contractor for installation if required in your locality.
Dumbwaiter Size and Weight Capacity Reference
Econo-Lift® Residential Dumbwaiter Systems:
Weight Capacity: 100 Lbs. 20”x20”x30” tall or 150 Lbs. 24”x24”x30 tall or custom size
Travel: available: up to 45’
Stops: up to 4 stops
Nominal Speed: 30 Feet per minute with optional 50 feet per minute travel speed
Overhead: Required space above the car on the top floor – 3”, can come up under 36” counter
Electrical requirements: 120 volts 1Ph 15 amp circuit (in bottom of hoist-way or at controller location)
Drive System: Winding drum
Motor: 1/2 Horsepower for 30 FPM travel speed or 3/4 Horsepower for 50 FPM travel speed 230 Volt 3 Phase industrial grade gear motors from Germany. VFD drive converts the 120V 1Ph
Controller Size: 16” x 16” x 6” deep
Sheave: 4-1/2” diameter
Winding Drum: 4-1/2” diameter
Cable Type: 1/8” 7×19 construction galvanized elevator lifting cable
Rail Type: Aluminum extruded 6061-T6 alloy (strongest aluminum alloy available)
Machine Placement: Below standard, above for flood zones
Car Gate: Extruded aluminum and PVC roll up gate system with nylon corners (life time gate)
Hoist-way Doors available: 20 minute fire rated stain grade birch, stainless steel 90 minute fire rated
Inteli-Lift Residential Dumbwaiter Systems:
Weight Capacity: 75 Lbs. 18”x18”x24”,125 Lbs. 24”x24”x24, 250Lb 28”x28”x28” Custom sizes 250Lb up to 30”x30”x30”x36”, 300 and 500Lb systems up to 36” x 36” x 48” tall.
Travel: available: up to 75’
Stops: up to 9 stops
Nominal Speed: 30 Feet per minute with optional 50 feet per minute travel speed
Overhead: Required space above the car on the top floor – 3”, can come up under 36” counter for 75Lb and 125Lb. 250Lb and above systems require 16” above the top of the car
Electrical requirements: 120 volts 1Ph 15 amp circuit (in bottom of hoist-way or at controller location) 300 / 500Lb units require 230 Volts 1 Ph or 3 Ph
Drive System: Winding drum
Motor: 1/2 Horsepower for 30 FPM travel speed or 3/4 Horsepower for 50 FPM travel speed 230 Volt 3 Phase industrial grade gear motors from Germany. VFD drive converts the 120V 1Ph 300 and 500Lb units 2 Horsepower 230 volt 1 Ph or 3 Ph
Controller Size: 16” x 16” x 6” deep
Sheave: 4-1/2” diameter / 300 and 500Lb 8” or 12″ diameter
Winding Drum: 4-1/2” diameter / 300 / 500Lb 8” or 12″ diameter
Cable Type: 1/8” 7×19 construction galvanized elevator lifting cable / 300 and 500Lb 1/4” 7×19 or 3/8″ 7×19 for 12″ diameter winding drum
Rail Type: Aluminum extruded 6061-T6 alloy (strongest aluminum alloy available)
Machine Placement: Below standard, above for flood zones or custom location
Car Gate: Extruded aluminum and PVC roll up gate system with nylon corners (life time gate) 300 and 500Lb Bi-Parting or Slide Up 3/4” thick expanded PVC stainless steel laminated
Hoist-way Doors available: 20 minute fire rated stain grade birch, stainless steel 90 minute fire rated Swing, Bi-Parting or Slide Up
Cab Gate Information
The cab gate is attached to the car and travels up and down with it up and down in the holist-way and keeps the items secure. Most car gates are equipped with an electrical switch that keeps the unit from running if the cab gate is open. This is an optional safety for residential units.
Roll Up Birch Cab
Roll Up Stainless Steel Cab
Bi-Parting
Slide Up
(shown with stainless protective coating)
Hoist-way Door Options
Available in a primed finish for field painting
20 Minute fire stain grade birch Swing
90 Minute Fire Rated Stainless Swing
90 Minute Rated Bi-Parting Stainless
90 Minute Rated Slide Up Stainless
Car Opening Configurations Available
* Econo-Lift® Available with three sides open
Hoist-way Lay Out and Dimensions Required
Refer to our website for standard hoist-way dimensions and lay out.
Residential Econo-Lift® Hoist-Way Drawings
Commercial and large Residential Inteli-Lift Drawings
Contact a sales representative at Elevation Innovation Inc for any and all details, questions or concerns. We have licensed elevator contractors in all areas of the USA and Canada.
Elevation Innovation Inc (530) 295-4900 (877) 345-4387 USA www.eilifts.com
WARRANTY
We Have The Longest Warranty in the Industry. 3 Year Commercial and 5 Year Residential limited warranties. Dumbwaiters are built to last 25+ years.